For laboratory research use only. Every lot independently tested; certificates published by lot.

KPV research peptide

KPV from KPV Labs is a synthetic tripeptide, supplied as a lyophilized powder in 10 mg vials. Every lot is independently tested, and its results are published as a lot record with the certificate PDF.

Last updated

Current lot
KB-96378
Purity (HPLC-UV)
99.69%
Identity (HPLC-RTM)
Confirmed
Reported
Oct 8, 2026
99.69%
HPLC-UV purity, current lots
342.43
Molecular weight (g/mol)
≥95%
Release specification
HPLC-RTM
Identity confirmed on every lot
1 size
10 mg vials

KPV at a glance

Specifications and current testing status in one place.

Product
KPV
Type
Synthetic tripeptide, 3 residues
Also known as
Lys-Pro-Val, α-MSH(11-13)
CAS number
67727-97-3
Molecular formula
C16H30N4O4
Molecular weight
342.43 g/mol (average)
Form
Lyophilized powder
Vial sizes
10 mg
Purity, current lots
99.69% (HPLC-UV)
Purity specification
≥95%
Identity
Confirmed by HPLC retention-time match on every lot
Testing laboratory
ILS Laboratories (independent)
Current lot
KB-96378, reported Oct 8, 2026
Operated by
Klow Labs LLC, Chicago, IL
Where to order
klow.bio

What KPV is

KPV is the tripeptide Lys-Pro-Val. It is the C-terminal end of α-melanocyte-stimulating hormone (α-MSH, positions 11 to 13), which is cut from the POMC precursor protein, and it is studied as the smallest fragment of that hormone that keeps measurable activity in laboratory models. With one lysine, one proline and one valine, it is among the simplest research peptides: a molecular weight of 342.43 g/mol and a single positive charge at neutral pH.

KPV Labs supplies KPV as a lyophilized powder in 10 mg vials. Each lot is tested by ILS Laboratories for HPLC purity, identity against a reference standard and net content, with a fentanyl screen, and the certificate is published here before the material is sold through Klow.bio.

Structure

KPV is linear with a free N-terminal amine and a free C-terminal acid. In α-MSH this same segment ends in an amide (Val-NH2); the tripeptide supplied here is the free acid, which is the form the formula and molecular weight describe.

complete KPV specifications.

Storage and handling

Store sealed, dry and protected from light at the temperature stated on the vial label. Allow a cold vial to reach room temperature before opening. Lyophilized material absorbs moisture from the air, and absorbed moisture restarts the reactions that drying slows, so keep vials sealed until needed. Storage and stability guide.

KPV specifications
ProductKPV
TypeSynthetic tripeptide
Molecular formulaC16H30N4O4
Molecular weight342.43 g/mol (average)
Length3 residues
SequenceKPV
N-terminusFree amine (Lys1)
C-terminusFree acid (Val3)
CAS number67727-97-3
FormLyophilized powder
Vial sizes10 mg
Purity specification≥95% (HPLC-UV)
Purity, current lots99.69%
StorageStore sealed, dry and protected from light at the temperature stated on the vial label. Allow a cold vial to reach room temperature before opening.
DesignationResearch use only

KPV research peptide: sizes and current lot results

Each vial size is listed with its current tested lot. Price: $39.99, with bundle pricing (2 vials save 5%; 3 or more vials save 10%). Current prices are always on klow.bio.

Vial sizeCurrent lotPurity (HPLC-UV)IdentityNet contentEndotoxinCertificateOrder
10 mg KB-96378 99.69% Confirmed 10.44 mg Not tested Lot KB-96378 Order 10 mg

Ordering and shipping. KPV is sold through klow.bio, operated by Klow Labs LLC. Orders ship the next business day. Same-day cutoff is 4:00 PM CT, with overnight and 2-day options at checkout. See shipping and returns.

How every KPV lot is tested

All testing is performed by ILS Laboratories, an independent laboratory, on every lot.

HPLC-UV purity

Answers: how much of the sample is the main compound?

Reversed-phase high-performance liquid chromatography separates the sample's components by hydrophobicity, and a UV detector records each as a peak. Purity is the main peak's area as a percentage of all detected peak area.

Limits: does not identify the peak, and impurities that co-elute or absorb weakly in UV can be under-counted. More on HPLC

Identity by HPLC retention-time match

Answers: does the main peak behave like a KPV reference standard?

The laboratory runs the sample and a reference standard of KPV under the same chromatographic conditions. Identity is reported as confirmed when the sample’s main peak elutes at the reference standard’s retention time.

Limits: a retention-time match is consistent with the named compound but is not a mass or structure measurement; compounds with similar retention can co-elute. More on HPLC

Fentanyl screen

Answers: is the named contaminant present above the assay cutoff?

The laboratory screens each lot by immunoassay at the cutoff printed on the certificate. Current lots are reported as not detected.

Limits: a negative result means below the cutoff for the sample tested; an immunoassay screens for its target only.

Net content

Answers: how much KPV is in the vial?

The laboratory quantifies the main compound in the tested vial against a standard. It is reported in milligrams next to the labeled vial size.

Limits: measured on the vial tested; other vials from the same lot are expected to be similar but are not individually measured.

Current lot

Identity by HPLC retention-time match, with the laboratory’s reference numbers.

Current KPV lot
ProductKPV 10 mg
LotKB-96378
Testing laboratoryILS Laboratories
Received / reportedOct 1, 2026 / Oct 8, 2026
Purity (HPLC-UV)99.69%
Identity (HPLC-RTM)Confirmed
Net content10.44 mg
FentanylNot detected
Endotoxin / PCRNot tested / Not tested
AccessionACC-2026-21796
Certificate numberCOA-2026-E14T3R
Lab access codeREB9C27L

Purity across lots

HPLC-UV purity for each current lot.

HPLC-UV purity by lot. The scale runs from 99.0% to 100% so small differences are visible; every lot shown meets the ≥95% release specification.

KPV questions

What is KPV?

KPV is a synthetic tripeptide. KPV Labs supplies it as a lyophilized powder in 10 mg vials, with an independent certificate of analysis for every lot.

What is KPV research material?

KPV research material is KPV supplied for laboratory research, sold by lot, with each lot's identity, purity and net content documented by an independent laboratory in a published certificate of analysis.

What is the molecular formula and weight of KPV?

The molecular formula is C16H30N4O4 and the average molecular weight is 342.43 g/mol. The peptide has 3 residues.

How should KPV be stored?

Store sealed, dry and protected from light at the temperature stated on the vial label. Allow a cold vial to reach room temperature before opening.

Where does the KPV sequence come from?

It is residues 11–13 of α-melanocyte-stimulating hormone (α-MSH), the C-terminal end of that 13-residue peptide.

Is KPV amidated?

No. The KPV supplied here is the free acid, Lys-Pro-Val-OH, C16H30N4O4, 342.43 g/mol.

Where can I buy KPV?

Current KPV research material availability is provided through Klow.bio, the purchasing platform operated by Klow Labs: https://klow.bio/product/kpv/ Lot records, testing information and certificates of analysis are published on kpv.bio so they can be reviewed before purchasing.

Can I order KPV?

Yes. Purchasing information and current availability for KPV research material are provided through Klow.bio: https://klow.bio/product/kpv/

Is every KPV lot independently tested?

Yes. Every lot is tested by ILS Laboratories, an independent laboratory, for HPLC-UV purity, HPLC-RTM identity and net content. The stated release specification is ≥95% HPLC-UV purity with identity confirmed by HPLC retention-time match against a reference standard. The current lot, KB-96378, reported 99.69% purity.

How can I verify a KPV lot?

Enter the lot number from your vial label at kpv.bio/verify/ to see that lot's results. To confirm with the laboratory directly: Go to portal.ils-lab.com (or scan the QR code on the certificate) and enter the lot's verification access code, listed on its lot page, to view the laboratory's own copy of the certificate.

How much does KPV cost?

The current price is $39.99, with bundle pricing (2 vials save 5%; 3 or more vials save 10%). Current pricing is always listed on Klow.bio.

How fast does KPV ship?

Orders ship the next business day. Same-day cutoff is 4:00 PM CT, with overnight and 2-day options at checkout.

Buy KPV

10 mg vials. Current lot KB-96378 tested at 99.69% purity with identity confirmed by HPLC retention-time match against a reference standard. Current purchasing is available through Klow.bio.